The MATRIX-1000 V2 is a complete sound reinforcement solution comprised of two 10″ two-way powered satellites and a dedicated powered 15″ subwoofer.
The MATRIX-1000 V2 has a built-in three-channel 700-watt power amplifier,
three distinct volume controls, electronic crossover with equalization and VCA compressor.
The circuitry is designed and fine-tuned to integrate all components for the best possible sound.
There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great.
Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables,
run two XLR cables to your mixer and you’re ready to go!

SUBWOOFER & BUILT-IN 3-CHANNEL AMPLIFIER The 15″ subwoofer enclosure is divided into two separate compartments.
The front chamber serves as the cabinet for the 15″ subwoofer.
The rear chamber houses all of the system’s electronic circuitry, which includes the amplification for all three components, power supply and preamps.
The 15″ subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.

  • Speaker: 15″ Custom Built B-52 Subwoofer
  • Nominal Impedance: 8 Ohms
  • Subwoofer Freq. Response: 40 Hz; 120 Hz +/- 3dB
  • Sound Pressure Level (1w/1m): 102 dB (half space)
  • Max. SPL: 127 dB @1% THD

10″ SATELLITE SPEAKERS The MATRIX-1000V2 satellites are loaded with a custom designed 10″ speaker and 1″ titanium diaphragm compression driver.
The horn has a 90 by 60 elliptical waveguide that can be rotated 90 to optimize the dispersion pattern to best suit your particular application.
These versatile speakers are pole-mountable and can sit as stage monitors.
They also include 3/8″ 16 tpi flying hardware for small venue permanent installations.
The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer,
allowing a mobile entertainer to stack, roll and transport the entire MATRIX-1000V2 in and out of a venue in record time.

  • Speaker Input: Speakon style connector
  • LF/MF Woofer: 10″ Custom Built B-52 Transducer
  • HF Driver: 1 Titanium Diaphragm
  • HF Dispersion: 90 x 60
  • Nominal Impedance: 4 Ohms
  • Active Freq. Response: 120 – 19K Hz +/- 3dB
  • Crossover Frequency (passive): 2.5 kHz; 12 dB / Octave
  • Sound Pressure Level (1w/1m): 101 dB (half space)
  • Max. SPL: 124 dB @10% THD

While the Satellite speakers are very compact, the subwoofer is too large for a very small car, although it will fit in most medium – large cars
Subwoofer Dimensions (looking at the front of the speaker)
Width: 61cm
Height: 49cm
Depth (inc wheels): 81cm
Weight 50kg – 2 man lift

Hearing Damage Warning

B-52 Pro-Audio speakers can produce sound levels high enough to cause permanent hearing damage. If it hurts, it is definitely too loud.
Repeated long-term exposure to high SPLs can and WILL CAUSE PERMANENT HEARING LOSS!